Wardrobe, made to measure.
Tall and deep: a hanging rail, inner drawers and, behind a third door, shelves. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
Three doors, a hanging rail, 2 inner drawers, 4 shelves, on a plinth 150 × 220 × 60 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the wardrobe.
| Part | L × W × T | Qty | Material | Finish |
|---|---|---|---|---|
| 1Side | 2200 × 600 × 18 | 2 | Veneered particle board | Warm white |
| 2Top | 1464 × 594 × 18 | 1 | Veneered particle board | Warm white |
| 3Bottom | 1464 × 594 × 18 | 1 | Veneered particle board | Warm white |
| 4Back panel | 2120 × 1464 × 6 | 1 | HDF back panel | Warm white |
| 5Hat shelf | 1464 × 574 × 18 | 1 | Veneered particle board | Warm white |
| 6Divider | 1766 × 574 × 18 | 1 | Veneered particle board | Warm white |
| 7Adjustable shelf | 574 × 479.5 × 18 | 4 | Veneered particle board | Warm white |
| 8Drawer cover | 574 × 479.5 × 18 | 1 | Veneered particle board | Warm white |
| 9Plinth | 1464 × 80 × 18 | 2 | Veneered particle board | Warm white |
| 10Door | 2078 × 484 × 18 | 3 | Veneered particle board | Natural oak |
| 11Inner drawer front | 473.5 × 194 × 18 | 2 | Veneered particle board | Natural oak |
| 12Drawer side | 491 × 149 × 18 | 4 | Veneered particle board | Warm white |
| 13Drawer back | 417.5 × 149 × 18 | 2 | Veneered particle board | Warm white |
| 14Drawer bottom | 473 × 417.5 × 6 | 2 | HDF back panel | Warm white |
| 15Bar pull, 160 mm | 160 × 34 × 12 | 2 | Steel | Matt black |
| 16Bar pull, 320 mm | 320 × 34 × 12 | 3 | Steel | Matt black |
| 17Hanging rail, 30 x 15 | 966.5 × 30 × 15 | 1 | Steel | Matt black |
27 panels: 11.46 m² of 18 mm board, 3.50 m² of 6 mm panel. Weight 157.0 kg.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edging and cutting by panel, hardware by count.
How it was built
33 bodies, rebuilt in 246 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
