Media wall, made to measure.
A floating TV cabinet between two towers, a bridge of shelf over the screen, a cable cut-out. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
Towers with doors below, a bridge, a floating base of 3 drawers, a cable cut-out 300 × 220 × 40 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the media wall.
| Part | L × W × T | Qty | Material | Finish |
|---|---|---|---|---|
| 1Tower side | 2200 × 350 × 18 | 4 | Veneered particle board | Walnut |
| 2Tower top and bottom | 564 × 344 × 18 | 4 | Veneered particle board | Walnut |
| 3Back panel | 2120 × 564 × 6 | 2 | HDF back panel | Walnut |
| 4Back panel | 1800 × 300 × 6 | 1 | HDF back panel | Walnut |
| 5Back panel | 1764 × 382 × 6 | 1 | HDF back panel | Walnut |
| 6Plinth | 564 × 80 × 18 | 2 | Veneered particle board | Walnut |
| 7Tower shelf | 564 × 324 × 18 | 6 | Veneered particle board | Walnut |
| 8Tower fixed shelf | 564 × 344 × 18 | 2 | Veneered particle board | Walnut |
| 9Tower door | 558 × 478 × 18 | 2 | Veneered particle board | Charcoal |
| 10Base side | 400 × 382 × 18 | 2 | Veneered particle board | Walnut |
| 11Base top | 1800 × 400 × 18 | 1 | Veneered particle board | Walnut |
| 12Base bottom | 1764 × 394 × 18 | 1 | Veneered particle board | Walnut |
| 13Base divider | 394 × 364 × 18 | 2 | Veneered particle board | Walnut |
| 14Drawer front | 570 × 358 × 18 | 3 | Veneered particle board | Charcoal |
| 15Drawer side | 346 × 313 × 18 | 6 | Veneered particle board | Walnut |
| 16Drawer back | 514 × 313 × 18 | 3 | Veneered particle board | Walnut |
| 17Drawer bottom | 514 × 328 × 6 | 3 | HDF back panel | Walnut |
| 18Bridge top and bottom | 1800 × 344 × 18 | 2 | Veneered particle board | Walnut |
| 19Bridge divider | 344 × 264 × 18 | 1 | Veneered particle board | Walnut |
| 20Bar pull, 160 mm | 160 × 34 × 12 | 5 | Steel | Matt black |
48 panels: 11.05 m² of 18 mm board, 4.11 m² of 6 mm panel. Weight 151.1 kg.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edging and cutting by panel, hardware by count.
How it was built
53 bodies, rebuilt in 216 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
