Skip to content
Sawlist

Shop counter, made to measure.

A straight or L-shaped counter: a raised front and ledge, a work top behind, a cable cut-out. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.

An L counter, its return at the right, 150 cm, a raised front 32 cm over the work top, a cable cut-out 180 × 106 × 70 cm

Custom sizes come with the engine, which loads in a moment.

Size cm, outside

120 to 240 cm

100 to 115 cm

60 to 80 cm

Layout
Shape

Return from the front

The return runs back to the wall behind the staff.

Cable cut-out

Finish
Ledge, work top and inside
Front panel and ends

Kick plate

Edge band

Each band in its part's own finish.

Example price made-up rates –

Weight
130.9 kg
Board
10.29 m²
Details weight, boards, hardware, CO₂
Weight, assembled
130.9 kg

The rest of the details are worked out by the page's script.

Demo for furniture makers. No orders are taken here.

The cut list, sheet layout and files for this unit

What the workshop receives

The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the shop counter.

PartL × W × TQtyMaterialFinishEdges banded
1Ledge1800 × 345 × 181Veneered particle boardWarm whiteFront, ends (1L 2W)
2Front panel1764 × 1042 × 181Veneered particle boardWalnutAll round (2L 2W)
3Inner panel1462 × 302 × 181Veneered particle boardWarm whiteNone
4Inner panel1180 × 302 × 181Veneered particle boardWarm whiteFront (1W)
5Work top1764 × 682 × 251Veneered particle boardWarm whiteFront (1L)
6End panel715 × 700 × 182Veneered particle boardWalnutAll round (2L 2W)
7End panel, upper700 × 327 × 181Veneered particle boardWalnutAll round (2L 2W)
8End panel, upper327 × 320 × 181Veneered particle boardWalnutAll round (2L 2W)
9Shelf873 × 662 × 182Veneered particle boardWarm whiteFront (1L)
10Upright715 × 682 × 181Veneered particle boardWarm whiteFront (1L)
11Return front panel1042 × 782 × 181Veneered particle boardWalnutAll round (2L 2W)
12Return ledge1180 × 320 × 181Veneered particle boardWarm whiteFront, one end (1L 1W)
13Return work top782 × 682 × 251Veneered particle boardWarm whiteFront (1W)
14Return shelf782 × 662 × 181Veneered particle boardWarm whiteFront (1W)
15Return end panel715 × 700 × 181Veneered particle boardWarm whiteNone
16Return end panel, upper327 × 320 × 181Veneered particle boardWarm whiteNone
17Kick plate, steel1800 × 100 × 21SteelMatt black–

18 panels: 8.55 m² of 18 mm board and 1.74 m² of 25 mm board. Weight 130.9 kg.

Edge banding: 18.3 m of Walnut, 9.9 m of Warm white.

Sheet layout

The panels above, laid out on standard boards for the panel saw.

  • Part, numbered as the cut list
  • Offcut to keep, 300 × 300 mm or more
  • Waste

Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.

Files

Demo for furniture makers. No orders are taken here.

The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.

Example price

An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edge banding by the metre, cutting by panel, hardware by count.

How it was built

19 bodies, rebuilt in 74 ms in advance by a real CAD engine from one parametric design. Its parameters:

    Made for a shop like yours

    Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.

    The other pieces