Workbench, made to measure.
A thick top on a storage base: an open shelf or a bank of drawers, a pegboard behind. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
A 36 mm laminated top over 3 drawers and an open shelf, a pegboard behind 180 × 165 × 70 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the workbench.
| Part | L × W × T | Qty | Material | Finish | Edges banded |
|---|---|---|---|---|---|
| 1Top | 1800 × 700 × 18 | 1 | Veneered particle board | Natural oak | Front, ends (1L 2W) |
| 2Top, lower board | 1800 × 700 × 18 | 1 | Veneered particle board | Natural oak | Front, ends (1L 2W) |
| 3End panel | 864 × 670 × 18 | 2 | Veneered particle board | Natural oak | Front (1L) |
| 4Back panel | 1764 × 764 × 6 | 1 | HDF back panel | Natural oak | None |
| 5Apron | 1764 × 100 × 18 | 1 | Veneered particle board | Natural oak | None |
| 6Shelf | 1764 × 664 × 18 | 1 | Veneered particle board | Natural oak | Front (1L) |
| 7Plinth | 1764 × 100 × 18 | 1 | Veneered particle board | Natural oak | None |
| 8Drawer bank side | 664 × 646 × 18 | 1 | Veneered particle board | Natural oak | Front (1W) |
| 9Drawer front | 494 × 209.3 × 18 | 3 | Veneered particle board | Charcoal | All round (2L 2W) |
| 10Drawer side | 616 × 164.3 × 18 | 6 | Veneered particle board | Natural oak | Top (1L) |
| 11Drawer back | 438 × 164.3 × 18 | 3 | Veneered particle board | Natural oak | Top (1L) |
| 12Drawer bottom | 598 × 438 × 6 | 3 | HDF back panel | Natural oak | None |
| 13Pegboard upright | 750 × 180 × 18 | 2 | Veneered particle board | Natural oak | Front, top (1L 1W) |
| 14Pegboard, perforated | 1764 × 750 × 6 | 1 | HDF back panel | Natural oak | None |
| 15Pegboard batten | 1764 × 60 × 18 | 2 | Veneered particle board | Natural oak | None |
| 16Pegboard shelf | 1764 × 150 × 18 | 1 | Veneered particle board | Natural oak | Front (1L) |
| 17Bar pull, 160 mm | 160 × 34 × 12 | 3 | Steel | Matt black | – |
| 18Tool rail, steel | 1564 × 24 × 12 | 1 | Steel | Matt black | – |
30 panels: 7.51 m² of 18 mm board, 3.46 m² of 6 mm panel. Weight 109.7 kg.
Edge banding: 19.2 m of Natural oak, 4.2 m of Charcoal.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edge banding by the metre, cutting by panel, hardware by count.
How it was built
34 bodies, rebuilt in 674 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
