Storage bed, made to measure.
A bed base the mattress's size, a headboard, two to four drawers under it. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
Double bed, 4 drawers 140 × 110 × 201.8 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the storage bed.
| Part | L × W × T | Qty | Material | Finish | Edges banded |
|---|---|---|---|---|---|
| 1Deck | 1400 × 1000 × 18 | 2 | Veneered particle board | Warm white | Front, ends (1L 2W) |
| 2Headboard | 1400 × 1100 × 18 | 1 | Veneered particle board | Walnut | All round (2L 2W) |
| 3Foot panel | 1400 × 342 × 18 | 1 | Veneered particle board | Warm white | None |
| 4Spine | 1982 × 342 × 18 | 1 | Veneered particle board | Warm white | Front (1W) |
| 5Cross panel | 691 × 342 × 18 | 2 | Veneered particle board | Warm white | None |
| 6Drawer front | 976 × 299 × 18 | 4 | Veneered particle board | Walnut | All round (2L 2W) |
| 7Drawer side | 600 × 274 × 18 | 8 | Veneered particle board | Warm white | Top (1L) |
| 8Drawer back | 920 × 274 × 18 | 4 | Veneered particle board | Warm white | Top (1L) |
| 9Drawer bottom | 920 × 582 × 6 | 4 | HDF back panel | Warm white | None |
| 10Grip profile, aluminium | 976 × 20 × 18 | 4 | Aluminum | Matt black | – |
27 panels: 9.46 m² of 18 mm board, 2.14 m² of 6 mm panel. Weight 125.4 kg.
Edge banding: 15.6 m of Warm white, 15.2 m of Walnut.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edge banding by the metre, cutting by panel, hardware by count.
How it was built
31 bodies, rebuilt in 457 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
