Filing cabinet, made to measure.
Deep drawers for A4 or letter hanging files, a lock, on a plinth or castors. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
4 file drawers for A4, a lock, on a plinth 47 × 132 × 62 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the filing cabinet.
| Part | L × W × T | Qty | Material | Finish | Edges banded |
|---|---|---|---|---|---|
| 1Side | 1302 × 620 × 18 | 2 | Veneered particle board | Charcoal | Front (1L) |
| 2Top | 620 × 470 × 18 | 1 | Veneered particle board | Charcoal | Front, ends (2L 1W) |
| 3Bottom | 614 × 434 × 18 | 1 | Veneered particle board | Charcoal | Front (1W) |
| 4Back panel | 1222 × 434 × 6 | 1 | HDF back panel | Charcoal | None |
| 5Plinth | 434 × 80 × 18 | 2 | Veneered particle board | Charcoal | None |
| 6File drawer front | 428 × 295 × 18 | 4 | Veneered particle board | Warm white | All round (2L 2W) |
| 7Drawer side | 566 × 250 × 18 | 8 | Veneered particle board | Charcoal | Top (1L) |
| 8Drawer back | 372 × 250 × 18 | 4 | Veneered particle board | Charcoal | Top (1L) |
| 9Drawer bottom | 548 × 372 × 6 | 4 | HDF back panel | Charcoal | None |
| 10Bar pull, 160 mm | 160 × 34 × 12 | 4 | Steel | Brushed steel | – |
| 11File rail, steel | 546 × 10 × 8 | 8 | Steel | Brushed steel | – |
| 12Lock, cylinder | 24 × 24 × 10 | 1 | Steel | Brushed steel | – |
| 13Locking bar, steel | 1184 × 20 × 8 | 1 | Steel | Brushed steel | – |
27 panels: 4.25 m² of 18 mm board, 1.35 m² of 6 mm panel. Weight 61.7 kg.
Edge banding: 10.8 m of Charcoal, 5.8 m of Warm white.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edge banding by the metre, cutting by panel, hardware by count.
How it was built
41 bodies, rebuilt in 972 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
