Garage wall cabinets, made to measure.
One to four wall cabinets with doors and adjustable shelves, hung on a French cleat. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
3 wall cabinets with two doors each, 2 shelves inside, on a French cleat 180 × 80 × 35 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the garage wall cabinets.
| Part | L × W × T | Qty | Material | Finish | Edges banded |
|---|---|---|---|---|---|
| 1Side | 800 × 332 × 18 | 6 | Veneered particle board | Warm white | Front, top (1L 1W) |
| 2Top and bottom | 564 × 326 × 18 | 6 | Veneered particle board | Warm white | Front (1L) |
| 3Back panel | 800 × 564 × 6 | 3 | HDF back panel | Warm white | None |
| 4Adjustable shelf | 564 × 306 × 18 | 6 | Veneered particle board | Warm white | Front (1L) |
| 5Door | 758 × 277.5 × 18 | 6 | Veneered particle board | Sage green | All round (2L 2W) |
| 6French cleat, cabinet strip | 600 × 90 × 18 | 3 | Veneered particle board | Warm white | None |
| 7French cleat, wall strip | 1800 × 90 × 18 | 1 | Veneered particle board | Warm white | None |
| 8Spacer strip | 600 × 60 × 18 | 3 | Veneered particle board | Warm white | None |
| 9Bar pull, 160 mm | 160 × 34 × 12 | 6 | Steel | Matt black | – |
34 panels: 5.43 m² of 18 mm board, 1.35 m² of 6 mm panel. Weight 71.7 kg.
Edge banding: 13.6 m of Warm white, 12.4 m of Sage green.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edge banding by the metre, cutting by panel, hardware by count.
How it was built
40 bodies, rebuilt in 636 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
