Hallway bench, made to measure.
A seat by the door with shoe storage under it: open cubbies or a drawer over a shoe shelf. Set any size within its range: the 3D model, the cut list and the files below follow, rebuilt in your browser from one parametric design.
A seat over 2 drawers and a shoe shelf, on legs 100 × 46 × 36 cm
What the workshop receives
The cut list of the unit above, as its CAD model measures the parts: sizes in mm, length × width × thickness. It changes as you change the hallway bench.
| Part | L × W × T | Qty | Material | Finish | Edges banded |
|---|---|---|---|---|---|
| 1Side | 360 × 342 × 18 | 2 | Veneered particle board | Natural oak | Front (1W) |
| 2Seat | 1000 × 360 × 18 | 1 | Veneered particle board | Natural oak | Front, ends (1L 2W) |
| 3Bottom | 964 × 354 × 18 | 1 | Veneered particle board | Natural oak | Front (1L) |
| 4Back panel | 964 × 342 × 6 | 1 | HDF back panel | Natural oak | None |
| 5Divider | 354 × 324 × 18 | 1 | Veneered particle board | Natural oak | Front (1W) |
| 6Fixed shelf | 473 × 354 × 18 | 2 | Veneered particle board | Natural oak | Front (1L) |
| 7Drawer front | 467 × 144 × 18 | 2 | Veneered particle board | Charcoal | All round (2L 2W) |
| 8Drawer side | 306 × 99 × 18 | 4 | Veneered particle board | Natural oak | Top (1L) |
| 9Drawer back | 411 × 99 × 18 | 2 | Veneered particle board | Natural oak | Top (1L) |
| 10Drawer bottom | 411 × 288 × 6 | 2 | HDF back panel | Natural oak | None |
| 11Bar pull, 160 mm | 160 × 34 × 12 | 2 | Steel | Matt black | – |
| 12Leg, oak, octagonal 34 mm | 100 × 34 × 34 | 4 | Oak | Natural oak | – |
18 panels: 1.73 m² of 18 mm board, 0.57 m² of 6 mm panel. Weight 23.9 kg.
Edge banding: 6.7 m of Natural oak, 2.4 m of Charcoal.
Sheet layout
The panels above, laid out on standard boards for the panel saw.
- Part, numbered as the cut list
- Offcut to keep, 300 × 300 mm or more
- Waste
Boards of 2800 × 2070 mm (plywood 2440 × 1220); a 4 mm saw kerf between parts and 10 mm trimmed off every edge. Each thickness, material and finish has its own boards, veneer and wood finishes keep their grain along the board, and every cut runs straight across, as a panel saw cuts. Waste is what can't be used again: the saw's cuts, the trimmed edges and offcuts too small to keep.
Files
Demo for furniture makers. No orders are taken here.
The cut list, the sheet layout, the STEP model, the design and a one-page summary, in one file.
Example price
An example with made-up rates, not a quote. A shop puts in its own: boards by area and finish, edge banding by the metre, cutting by panel, hardware by count.
How it was built
24 bodies, rebuilt in 1343 ms in advance by a real CAD engine from one parametric design. Its parameters:
Made for a shop like yours
Every piece here is an example of what Sawlist builds for a workshop's own range. How it works for furniture makers, or see the site in your workshop's name and colour.
